Low-pressure solar geysers contain the following components:

• • Inner Tank 
    Fashioned from grade 304 stainless steel, which is corrosion/oxidation resistant.

• • Insulation 
    5 cm Polyurethane foam, maintain water temperature overnight.

• • Outer Tank
    Produced from 0.45mm galvanized metal sheet.
• • Heat Collectors 
    Comprise of evacuated glass tubes, which have higher heat collection efficiency than the flat panel systems. The collectors are vacuum-sealed which renders them resistant to climate change and extreme temperatures. This enables them to heat the system directly without any anti-freeze chemicals; the water is heated directly resulting in a higher efficiency. Collectors have passed the SABS test for 30mm hail impact.
• Roof supports
  Fashioned from aluminium and is therefore rust proof. Furthermore, the supports are designed to hold the heat collector at 27.5 degrees which is the optimal angle for sun radiation absorption in South Africa.
• Solarwise Set(Electrical backup option) is available with an intelligent heating controller, heating element, temperature sensor and controlled inlet valve. These features allow water heating in conditions where the suns radiation is insufficient and allows the user to use the full capacity of available hot water before the system automatically fills up with cold water.Solar Pressure Pump increases the water pressure output from gravity feed pressure to 3 bars so they can be used to feed more than one bathroom.