EasySolar 48/5000/70 MPPT 150/100 Color Control

Description

Transfer switch 100A
INVERTER
Input voltage range 38 – 64V
‘Heavy duty’ output AC 2 16 A
Output AC 1a, 1b, 1c, 1d Output voltage: 230VAC ± 2%
Frequency: 50 Hz ± 0,1% (1)
Cont. output power at 25°C (3) 5000VA / 4000W
Cont. output power at 40°C 3700W
Cont. output power at 65°C 3000W
Peak power 10000W
Maximum efficiency 95%
Zero load power 35W
Zero load power in search mode 15W
CHARGER
AC Input Input voltage range: 187-265 VAC
Input frequency: 45 – 65 Hz Power factor: 1
Charge voltage ‘absorption’ 57,6V
Charge voltage ‘float’ 55,2V
Storage mode 52,8V
Charge current 70A
Battery temperature sensor yes
Programmable relay (5) yes
Protection (2) a – g
SOLAR CHARGE CONTROLLER
Model MPPT 150/100-MC4
Maximum output current (4) 100A
Maximum PV power 5800W
Maximum PV open circuit voltage 150V
Maximum efficiency 98%
Self-consumption 10mA
Charge voltage ‘absorption’, default setting 57,6V
Charge voltage ‘float’, default setting 55,2V
Charge algorithm multi-stage adaptive
Temperature compensation -64 mV / °C
Protection a – g
COMMON CHARACTERISTICS
Operating temp. range -40 to +65°C (fan assisted cooling)
Humidity (non-condensing): max 95%
ENCLOSURE
Material & Colour aluminium (blue RAL 5012)
Protection category IP 21
Battery-connection Four M8 bolts (2 plus and 2 minus connections)
PV connection Three sets of MC4 PV connectors.
230 V AC-connection Screw terminals 13 mm2 (6 AWG)
Weight 48kg
Dimensions (hxwxd) 877 x 328 x 218
STANDARDS
Safety EN 60335-1, EN 60335-2-29, EN 62109-1
Emission / Immunity EN 55014-1, EN 55014-2, EN 61000-3-3, EN 61000-6-3, EN 61000-6-2, EN 61000-6-1
Anti-islanding See our website
1) Can be adjusted to 60Hz and to 240V
2) Protection:
a. Output short circuit
b. Overload
c. Battery voltage too high
d. Battery voltage too low
e. Temperature too high
f. 230 VAC on inverter output
g. Input voltage ripple too high
3) Non-linear load, crest factor 3:1
4) At 25°C ambient
5) Programmable relay which can be set for general alarm, DC under
voltage or genset start signal function