Phoenix 12/800 schuko

0 out of 5


VE.Direct communication port
The VE.Direct port can be connected to:
• A computer (VE.Direct to USB interface cable needed)
• Apple and Android smartphones, tablets, MacBook’s and other devices
(VE.Direct Bluetooth Smart dongle needed)
Fully configurable:
• Low battery voltage alarm trip and reset levels
• Low battery voltage cut-off and restart levels
• Dynamic cut-off: load dependent cut-off level
• Output voltage 210 – 245V
• Frequency 50 Hz or 60 Hz
• ECO mode on/off and ECO mode sense level
• In- and output voltage, % load and alarms
Proven reliability
The full bridge plus toroidal transformer topology has proven its reliability over many years.
The inverters are short circuit proof and protected against overheating, whether due to overload or
high ambient temperature.
High start-up power
Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools.
ECO mode
When in ECO mode, the inverter will switch to standby when the load decreases below a preset
value (min load: 15W). Once in standby the inverter will switch on for a short period (adjustable,
default: every 2,5 seconds). If the load exceeds a preset level, the inverter will remain on.
Remote on/off
A remote on/off switch can be connected to a two pole connector, or between battery plus and the
left hand contact of the two pole connector.
LED diagnosis
Please see manual for a description.
To transfer the load to another AC source: the automatic transfer switch
For our low power inverters we recommend our Filax Automatic Transfer Switch. The Filax features
a very short switchover time (less than 20 milliseconds) so that computers and other electronic
equipment will continue to operate without disruption.
Available with different output sockets
Schuko UK AU/NZ IEC-320 Nema 5-15R
(male plug included)
DC connection with screw terminals
No special tools needed for installation



Cont. power at 25 degree celcius(1): 800VA

Cont. power at 25/40 degree celcuis: 650/560W

Peak power: 1500W

Output AC voltage/frequency(adjustable): 230VAC or 120VAC +/-3%  50Hz or 60Hz +-.01%

Input voltage range: 9,2-17/18,4-34,0/36,8-62,0V

DC low shut down(adjustable): 9,3/18,6/37,2V

Dynamic(load dependant) DC low shut down(fully configurable):

DC low restart and alarm(adjustable): 10,9/21,8/43,6V

Battery charged detect(adjustable): 14,0/28,0/56,0V

Max efficiency: 90/90/91%

Zero-load power: 6,5/7/9,5W

Default zero-load power in ECO mode(default retry interval:2,5s,adjustable: 1/1,5/3,0W

ECO mode stop and start power setting: Adjustable

Protection(2): a-f

Operating temperature range: -40 to +65 degree celcius(fan assisted cooling) Derate 1,25% per degree celcuis above 40 degree celsius

Humidity(non-condensing) max 95%


Material & Colour: Steel chassis and plastic cover (blue Ral 5012)

Battery-connection: Screw terminals

Maximuim cable cross section: 10mm2 / AWG8

Standard AC outlets: 230V: Schuko(CEE 7/4). IEC-320(male plug included) UK(BS 1363), AU/NZ (AS/NZS 3112) 120V:Nema 5-15R

Protection category: IP21

Weight: 5,5kg/5,12lbs

Dimensions(mm) 105x216x305


Remote on-off: Yes

Automatic transfer switch: Filax


Safety: EN-IEC 60335-1 / EN-IEC 62109-1

EMC: EN 55014-1/ EN55014-2 / IEC6100-6-1 / IEC6100-6-2 / IEC6100-6-3

Automatic Directive: ECE R10-4

  • Nonlinear load, crest factor 3:1
  • Protection key:
  • a) output short circuit
  • b) overload
  • c) battery voltage too high
  • d) battery voltage too low
  • e) temperature too high
  • f) DC ripple too high

Additional information

Weight 5.5 kg
Dimensions 10.5 × 21.6 × 30.5 cm


There are no reviews yet.

Be the first to review “Phoenix 12/800 schuko”