This product is currently on sale, hurry up!

Home/Batteries/Batteries - Lithium/Rentech 51.2V 100Ah LiFePO4 Battery with CANBUS – (5.12kWh)

Products on sale

  • Kool Energy 1KW 1000W 12VPure Sine Wave Trolley Inverter with 100Ah Battery

    R6,000.00

  • Kool Energy 1kW 25.6V 1x50Ah Lithium Battery Pure Sine Wave Inverter 820W Solar Charge Controller

    R11,500.00

  • WECO 4K4L BATTERY, 4.4KWH, 48V, INCLUDES LV KIT

    R24,150.00

  • SRNE 3.5kW All In One Vertical Energy Storage System (5,12kWh Battery

    R29,000.00

Rentech 51.2V 100Ah LiFePO4 Battery with CANBUS – (5.12kWh)

R23,115.00

17% Off

3 in stock

3 in stock

Description

This Rentech 51.2V 100Ah LiFePO4 Battery with CANBUS – (5.12kWh)

  • Lithium-Iron Phosphate Battery with 6000 cycles @ 80% DoD
  • Built-in Battery Management System
    • Over voltage protections system 
    • Low voltage protection system 
    • High temperature protection 
  • Safe and Reliable

his series of rack-mounted Lithium-ion batteries are designed for the solar / backup power market. This series combines safe and reliable LFP prismatic cells with dedicated BMS to guarantee high reliability, safety and scalability.

This product can be installed in a 19” or 21” standard cabinet or rack.

The expected cycle life for these batteries when installed, operated and maintained as per the manual are as follows:

  • At 80% DoD, 6000 cycles
  • At 90% DoD, 5000 cycles

It is very important to properly fully charge the battery after initial installation and leave it on charge without a load on for a couple of hours to ensure the BMS had a chance to balance the cells BEFORE you start using the battery.

Voltage: 51.2V 

Rated Capacity: 100Ah 

Total Energy: 5,12 KWh 

Recharge Voltage: 55,2V 

Dimensions (mm): (d) 500 x (w) 442 x (h) 178

  • SAFETY 
    • Over voltage protections system 
    • Low voltage protection system 
    • High temperature protection 
    • Low temperature protection 
    • Short circuit protection 
    • Over current protection 

     BATTERY MANAGEMENT SYSTEM (BMS) 

    • Separate control and protection for the charge and discharge processes to maximize system availability 
    • Real-time detection of voltage, current, temperature, SOH, SOC and a variety of protection 
    • Support for parallel connection only 

     CELL 

    • Lithium Iron Phosphate (LFP) prismatic cells with high safety and reliability 
    • Fully automated production following a mature and stable process, ensuring consistent charge / discharge performance and life span 
    • IEC62133, UL and UN38.3 certifications 

     BENEFITS OF SOLAR BATTERIES 

    • Source of clean energy 
    • Reduced noise levels compared to generators 
    • Cost savings 
    • Uninterrupted electricity supply 

     CONSIDERATIONS WHEN CHOOSING SOLAR BATTERIES 

     Capacity and power ratings 

    • A battery’s capacity is the total amount of energy it can store, measured in kilowatt-hours (kWh). The power rating is the amount of electricity that a battery can deliver at one time, measured in kilowatts (kW). A battery with high capacity and low power rating will deliver a low amount of electricity for a long time. A battery with a low capacity and high-power rating can run an entire home or larger operation, but only for a few hours. 

     Depth of Discharge 

    • Most solar batteries need to retail some charge at all time due to their chemical composition and to prolong their lifespan. The DoD refers to the maximum of a battery’s capacity that should be used. For example, sealed lead-acid solar batteries are usually operated at  £ 50% DOD to achieve a reasonable cycle life, while lithium-ion batteries can operate at 80% DOD, 8kWh from a 10kWh battery, and still provide 5 years or more cycle life. 

     Round-trip efficiency 

    • Round-trip efficiency represents the amount of energy that can be used as a percentage of the amount of energy required to fully charge a battery. For example, if a 5kWh capacity battery, which delivers 4 kWh electricity, would typically require 110% to 120% times the 4kWh to be fully recharged. The battery has 80% to 90% in round-trip efficiency. One should, however, remember that the battery is part of the total system, and the system also has inefficiencies and energy losses. 

     Battery life and warranty 

    A battery’s ability to hold a charge gradually decreases the more it is used. For example, a battery might be warrantied for 5000 cycles or 10 years at 70% of its original capacity. This means that at the end of the warranty, the battery will have lost no more than 30% of its original ability to store energy. 

    Solar batteries come with warranties that guarantee a certain number of cycles and/or years of useful life. 

    This product has a 5-year warranty with a 10-year warranty option (refer to Rentech Lithium Warranty form) 

Additional information

Weight 51 kg
Dimensions 43 × 43 × 17.7 cm

Reviews

There are no reviews yet.

Be the first to review “Rentech 51.2V 100Ah LiFePO4 Battery with CANBUS – (5.12kWh)”

Related products

  • Kool Energy 1KW 1000W 12VPure Sine Wave Trolley Inverter with 100Ah Battery

    R6,000.00

    29% Off

  • Kool Energy 1kW 25.6V 1x50Ah Lithium Battery Pure Sine Wave Inverter 820W Solar Charge Controller

    R11,500.00

    24% Off

  • WECO 4K4L BATTERY, 4.4KWH, 48V, INCLUDES LV KIT

    R24,150.00

    24% Off

  • SRNE 3.5kW All In One Vertical Energy Storage System (5,12kWh Battery

    R29,000.00

    15% Off

Title

Go to Top