VICTRON SOLAR CHARGE CONTROLLER – BLUESOLAR PWM-PRO 12/24V-30A
Description
BlueSolar PWM-Pro 12/24-5 12/24-10 12/24-20 12/24-30
Battery Voltage 12/24V with automatic system voltage detection
Rated charge current 5A 10A 20A 30A
Automatic load disconnect Yes
Maximum solar voltage 28V / 55V (1)
Self-consumption < 10mA
Load output Manual control + low voltage disconnect
Protection Battery reverse polarity (fuse) Output short circuit Over temperature
Battery temperature sensor Optional (article SCC940100100)
Temperature compensation -30 mV / °C resp. -60 mV / °C
(if temperature sensor installed)
Remote panel Optional (article SCC900300000)
Grounding Common positive
Operating temp. range -20 to +50°C
Humidity (non-condensing) Max 98%
DEFAULT SETTINGS
Absorption charge (2) 14.4V / 28,8V
Float charge (2) 13.8V / 27,6V
Equalization charge (2) 14,6V / 29,2V
Low voltage load disconnect 11,1V / 22,2V
Low voltage load reconnect 12,6V / 25,2V
ENCLOSURE
Terminal size 4mm² 4mm² 10mm² 10mm²
Protection category IP30
Weight 0,13kg 0,13kg 0,3kg 0,5kg
Dimensions (h x w x d) 138x70x37 mm
5.4×2.7×1.4 inch
138x70x37 mm
5.4×2.7×1.4 inch
160x82x48 mm
6.3×3.2×1.9 inch
200x100x57 mm
7.9×4.0x2.3 inch
STANDARDS
Safety IEC 62109-1
Emission EN 61000-6-1, EN 61000-6-3, ISO 7637-2
1) For 12V use 36 cell Solar panels
For 24V use 72 cell Solar panels
Additional information
Weight | 0.13 kg |
---|---|
Dimensions | 3.7 × 7 × 13.8 cm |
You must be logged in to post a review.
Reviews
There are no reviews yet.