BlueSolar MPPT 100/15

Description

BlueSolar Charge Controller 100/15
Battery voltage 12/24V Auto Select
Rated charge current 15A
Nominal PV power, 12V 1a,b) 220W
Nominal PV power, 24V 1a,b) 440W
Max. PV short circuit current 2) 15A
Automatic load disconnect Yes, maximum load 15A
Maximum PV open circuit voltage 100V
Peak efficiency 98%
Self-consumption 12V: 20 mA 24V: 10 mA
Charge voltage ‘absorption’ 14,4V / 28,8V (adjustable)
Charge voltage ‘float’ 13,8V / 27,6V (adjustable)
Charge algorithm multi-stage adaptive
Temperature compensation -16 mV / °C resp. -32 mV / °C
Continuous/peak load current 15A / 50A
Low voltage load disconnect 11,1V / 22,2V or 11,8V / 23,6V
or Battery Life algorithm
Low voltage load reconnect 13,1V / 26,2V or 14V / 28V
or Battery Life algorithm
Protection Battery reverse polarity (fuse)
Output short circuit / Over temperature
Operating temperature -30 to +60°C (full rated output up to 40°C)
Humidity 95%, non-condensing
Data communication port VE.Direct
See the data communication white paper on our website
ENCLOSURE
Colour Blue (RAL 5012)
Power terminals 6 mm² / AWG10
Protection category IP43 (electronic components), IP22 (connection area)
Weight 0,5 kg
Dimensions (h x w x d) 100 x 113 x 40 mm
STANDARDS
Safety EN/IEC 62109-1, UL 1741, CSA C22.2
1a) If more PV power is connected, the controller will limit input power.
1b) PV voltage must exceed Vbat + 5V for the controller to start.
Thereafter minimum PV voltage is Vbat + 1V
2) A PV array with a higher short circuit current may damage the controller.