EasySolar 48/5000/70 MPPT 150/100 Color Control

0 out of 5

R59,831.30

The all-in-one solar power solution
The EasySolar combines a MPPT solar charge controller, an inverter/charger and AC distribution
in one enclosure.
The product is easy to install, with a minimum of wiring.
Color Control panel
Two outstanding functions:
– Prioritizes battery charging by the MPPT charge controller
– Connects to the internet, enabling remote monitoring (VRM website) and remote control.
AC distribution
The AC distribution consists of a RCD (30mA / 63A) and four AC outputs protected by two 10A
and two 16A circuit breakers.
An additional 16A output is controlled by the AC input: it will switch on only when AC is available.
PowerAssist
Unique PowerAssist technology protects the utility or generator supply from being overloaded
by adding extra inverter power when needed

Compare

Description

Transfer switch 100A
INVERTER
Input voltage range 38 – 64V
‘Heavy duty’ output AC 2 16 A
Output AC 1a, 1b, 1c, 1d Output voltage: 230VAC ± 2%
Frequency: 50 Hz ± 0,1% (1)
Cont. output power at 25°C (3) 5000VA / 4000W
Cont. output power at 40°C 3700W
Cont. output power at 65°C 3000W
Peak power 10000W
Maximum efficiency 95%
Zero load power 35W
Zero load power in search mode 15W
CHARGER
AC Input Input voltage range: 187-265 VAC
Input frequency: 45 – 65 Hz Power factor: 1
Charge voltage ‘absorption’ 57,6V
Charge voltage ‘float’ 55,2V
Storage mode 52,8V
Charge current 70A
Battery temperature sensor yes
Programmable relay (5) yes
Protection (2) a – g
SOLAR CHARGE CONTROLLER
Model MPPT 150/100-MC4
Maximum output current (4) 100A
Maximum PV power 5800W
Maximum PV open circuit voltage 150V
Maximum efficiency 98%
Self-consumption 10mA
Charge voltage ‘absorption’, default setting 57,6V
Charge voltage ‘float’, default setting 55,2V
Charge algorithm multi-stage adaptive
Temperature compensation -64 mV / °C
Protection a – g
COMMON CHARACTERISTICS
Operating temp. range -40 to +65°C (fan assisted cooling)
Humidity (non-condensing): max 95%
ENCLOSURE
Material & Colour aluminium (blue RAL 5012)
Protection category IP 21
Battery-connection Four M8 bolts (2 plus and 2 minus connections)
PV connection Three sets of MC4 PV connectors.
230 V AC-connection Screw terminals 13 mm2 (6 AWG)
Weight 48kg
Dimensions (hxwxd) 877 x 328 x 218
STANDARDS
Safety EN 60335-1, EN 60335-2-29, EN 62109-1
Emission / Immunity EN 55014-1, EN 55014-2, EN 61000-3-3, EN 61000-6-3, EN 61000-6-2, EN 61000-6-1
Anti-islanding See our website
1) Can be adjusted to 60Hz and to 240V
2) Protection:
a. Output short circuit
b. Overload
c. Battery voltage too high
d. Battery voltage too low
e. Temperature too high
f. 230 VAC on inverter output
g. Input voltage ripple too high
3) Non-linear load, crest factor 3:1
4) At 25°C ambient
5) Programmable relay which can be set for general alarm, DC under
voltage or genset start signal function

Additional information

Weight 48 kg
Dimensions 87.7 × 32.8 × 24.1 cm

Reviews

There are no reviews yet.

Be the first to review “EasySolar 48/5000/70 MPPT 150/100 Color Control”

X