Victron Energy BlueSolar MPPT Charge Controller 100/50

0 out of 5

R5,489.27

BlueSolar MPPT 100/50 (12/24V – 50A)

Charge current up to 50 A and PV voltage up to 75 V, respectively 100 V
The BlueSolar Charge Controller will charge a lower nominal voltage battery with a higher nominal voltage PV array. The controllers automatically adjust to 12 V or 24 V nominal battery voltage.

Feature Highlights

  • Ultra-fast Maximum Power Point Tracking (MPPT)
  • Advanced Maximum Power Point Detection in case of partial shading conditions
  • Load output on the small models
  • BatteryLife: intelligent battery management by load shedding
  • Automatic battery voltage recognition
  • Flexible charge algorithm
  • Over-temperature protection and power de-rating when temperature is high

All Victron Energy MPPT Charge Controllers are compatible with the Color Control GX: The Color Control GX provides intuitive control and monitoring for all products connected to it. The list of Victron products that can be connected is endless: Inverters, Multis, Quattros, MPPT 150/70, BMV-600 series, BMV-700 series, Skylla-i, Lynx Ion and even more.

Compare

Description

BlueSolar charge controller MPPT 100/50
Battery voltage 12/24 V Auto Select
Rated charge current 50 A
Maximum PV power, 12V 1a,b) 700 W (MPPT range 15 V to 70 V resp. 95 V)
Maximum PV power, 24V 1a,b) 1400 W (MPPT range 30 V to 70 V resp. 95 V)
Maximum PV open circuit voltage 100 V
Maximum efficiency 98 %
Self-consumption 10 mA
Charge voltage ‘absorption’ Default setting: 14,4 V / 28,8 V (adjustable)
Charge voltage ‘float’ Default setting: 13,8 V / 27,6 V (adjustable)
Charge algorithm multi-stage adaptive
Temperature compensation -16 mV / °C resp. -32 mV / °C
Protection
Battery reverse polarity (fuse, not user accessible)
PV reverse polarity
Output short circuit
Over temperature
Operating temperature -30 to +60°C (full rated output up to 40°C)
Humidity 95 %, non-condensing
Data communication port VE.Direct
See the data communication white paper on our website
ENCLOSURE
Colour Blue (RAL 5012)
Power terminals 13 mm² / AWG6
Protection category IP43 (electronic components), IP22 (connection area)
Weight 1,25 kg
Dimensions (h x w x d) 130 x 186 x 70 mm
STANDARDS
Safety EN/IEC 62109
1a) If more PV power is connected, the controller will limit input power to 700W resp. 1400W
1b) PV voltage must exceed Vbat + 5V for the controller to start.
Thereafter minimum PV voltage is Vbat + 1V

 

Additional information

Weight 1.3 kg
Dimensions 7.4 × 4.8 × 2.9 cm

Reviews

There are no reviews yet.

Be the first to review “Victron Energy BlueSolar MPPT Charge Controller 100/50”

X