JA Solar 460W Mono MBB Percium Half-Cell Silver Frame Short Frame MC4
R1,430.00
52% Off
- Rating: 460W
- Efficiency: 20.7%
- Width: 1,052mm
- Height: 2,112mm
JA Solar 460W Mono MBB Percium Half-Cell Silver Frame MC4
- High output power
- Less shading effect
- Lower temperature coefficient
- Better mechanical loading tolerance
Please note this module has Silver Frame and White Backsheet.
Comes supplied with MC4 connectors and 1200mm long cables
This module comes with a 12 year product warranty and a 25 year performance warranty.
BlueSmart IP22 Charger 12/15(3) 230V CEE 7/7
R2,780.96
Input voltage range 180 – 265 VAC
Charge current, normal mode 15A
Charge current, NIGHT or LOW 7,5 / 10 / 15 A
Efficiency 93%
No load power consumption 0.5 W
Frequency 45 – 65 Hz
Number of outputs 3
Charge voltage ‘absorption’ Normal 14,4V High: 14,7V Li-ion: 14,2V
Charge voltage ‘float’ Normal: 13,8V High: 13,8V Li-ion: 13,5V
Charge voltage ‘storage ‘ Normal: 13,2V High: 13,2V Li-ion: 13,5V
Charge algorithm 6-stage adaptive
Can be used as power supply Yes
Protection Battery reverse polarity (fuse) Output short circuit Over temperature
Operating temp. range -20 to +50°C
Humidity (non-condensing) Max 98%
ENCLOSURE
Material & Colour Aluminium (blue RAL 5012)
Battery connection Screw terminals 13 mm² / AWG6
230 V AC connection Cable of 1,5 meter with CEE 7/7 plug, BS 1363 plug (UK) or AS/NZS 3112 plug (AU/NZ)
Protection category IP22
Weight 1,3 kg
Dimensions (h x w x d) 235 x 108 x 65 mm
STANDARDS
Safety EN 60335-1, EN 60335-2-29
Emission EN 55014-1, EN 61000-6-3, EN 61000-3-2
Immunity EN 55014-2, EN 61000-6-1, EN 61000-6-2, EN 61000-3-3
Automotive E4-10R
Sunsynk 8kW Hybrid PV Inverter 48v IP65
R29,095.00
SUNSYNK-8.8KW
The Sunsynk Hybrid Parity Inverter is a highly efficient power management tool that allows the user to hit those ‘parity’ targets by managing power coming from multiple sources such as solar, mains grid and generator and then effectively storing and releasing electric power as the utilities require.The Inverter has many uses and is recommended for the following applications:• Marine (vessel power management)• Power shedding (home / office / factory)• UPS (fuel saving systems)• Remote locations with solar and wind generators• Building sites• Military locations• Telecommunication sitesFEATURES
• 220V single phase, pure sine wave inverter• Self consumption & feed-in to the grid• Auto re-start while AC is recovering• Programmable supply priority for battery or grid• Programmable multiple operation modes; on-grid / off-grid & UPS• Configurable battery charging – current / voltage based on applications by LCD setting• Configurable AC / solar / generator charger priority by LCD setting• Compatible with mains voltage or generator power• Overload / over-temperature / short-circuit protection• Smart battery charger designer optimised battery protection• Limit-function installed to prevent excess power overflow to grid• Supporting Wi-Fi monitoring and built-in 2 strings of MPP trackers• Smart settable 3-stage MPPT charging for optimised battery performance• Time of use function• Smart load functionBlueSmart IP22 Charger 12/20(3) 230V CEE 7/7
R3,293.75
Input voltage range 180 – 265 VAC
Charge current, normal mode 20A
Charge current, NIGHT or LOW 7,5 / 10 / 15 A
Efficiency 93%
No load power consumption 0.5 W
Frequency 45 – 65 Hz
Number of outputs 3
Charge voltage ‘absorption’ Normal 14,4V High: 14,7V Li-ion: 14,2V
Charge voltage ‘float’ Normal: 13,8V High: 13,8V Li-ion: 13,5V
Charge voltage ‘storage ‘ Normal: 13,2V High: 13,2V Li-ion: 13,5V
Charge algorithm 6-stage adaptive
Can be used as power supply Yes
Protection Battery reverse polarity (fuse) Output short circuit Over temperature
Operating temp. range -20 to +50°C
Humidity (non-condensing) Max 98%
ENCLOSURE
Material & Colour Aluminium (blue RAL 5012)
Battery connection Screw terminals 13 mm² / AWG6
230 V AC connection Cable of 1,5 meter with CEE 7/7 plug, BS 1363 plug (UK) or AS/NZS 3112 plug (AU/NZ)
Protection category IP22
Weight 1,3 kg
Dimensions (h x w x d) 235 x 108 x 65 mm
STANDARDS
Safety EN 60335-1, EN 60335-2-29
Emission EN 55014-1, EN 61000-6-3, EN 61000-3-2
Immunity EN 55014-2, EN 61000-6-1, EN 61000-6-2, EN 61000-3-3
Automotive E4-10R
Multiplus 12/1200/50-16
R12,990.84
Proven reliability
The full bridge plus toroidal transformer topology has proven its reliability over many years.
The inverter is short circuit proof and protected against overheating, whether due to overload or high ambient temperature.
PowerControl – Dealing with limited generator, shore side or grid power
With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever
is extra for charging, thus preventing the generator or shore supply from being overloaded.
PowerAssist – Boosting the capacity of shore or generator power
Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately
compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery.
High start-up power
Needed to start high inrush loads such as power converters for LED lamps, halogen lamps or electric tools.
Search Mode
When Search Mode is ‘on’, the power consumption of the inverter in no-load operation is decreased by approx. 70%. In this mode the Multi, when
operating in inverter mode, is switched off in case of no load or very low load, and switches on every two seconds for a short period. If the output current
exceeds a set level, the inverter will continue to operate. If not, the inverter will shut down again.
Programmable relay
By default, the programmable relay is set as
an alarm relay, i.e. the relay will de-energise
in the event of an alarm or a pre-alarm
(inverter almost too hot, ripple on the input
almost too high, battery voltage almost too
low).
Remote on / off / charger on
Three pole connectBlue Smart IP22 Charger 24V, 1 output 12A
R2,982.58
Input voltage range 180 – 265 VAC
Charge current, normal mode 12A
Charge current, NIGHT or LOW 4 / 6 / 8 A
Efficiency 94%
No load power consumption 0.5 W
Frequency 45 – 65 Hz
Number of outputs 1
Charge voltage ‘absorption’ Normal: 28,8V High: 29,4V Li-ion: 28,4V
Charge voltage ‘float’ Normal: 27,6V High: 27,6V Li-ion: 27,0V
Charge voltage ‘storage Normal: 26,4V High: 26,4V Li-ion: 27,0V
Charge algorithm 6-stage adaptive
Can be used as power supply Yes
Protection Battery reverse polarity (fuse) Output short circuit Over temperature
Operating temp. range -20 to +50°C
Humidity (non-condensing) Max 98%
ENCLOSURE
Material & Colour Aluminium (blue RAL 5012)
Battery connection Screw terminals 13 mm² / AWG6
230 V AC connection Cable of 1,5 meter with CEE 7/7 plug, BS 1363 plug (UK) or AS/NZS 3112 plug (AU/NZ)
Protection category IP22
Weight 1,3 kg
Dimensions (h x w x d) 235 x 108 x 65 mm
STANDARDS
Safety EN 60335-1, EN 60335-2-29
Emission EN 55014-1, EN 61000-6-3, EN 61000-3-2
Immunity EN 55014-2, EN 61000-6-1, EN 61000-6-2, EN 61000-3-3
Automotive E4-10R
Shop Grid – 3 ColumnsMarketing2021-03-01T16:11:38+02:00
